LED Dimmable Driver – Keep This In Mind..

Among the issues of LED lights dimmability is among the latest challenges still yet to be fully solved. Dimming LEDs is theoretically easy, because analogue dimming, which is the adjustment of current, has long been an option. However, this method only works safely when combined with one LED bulb. Systems of LEDs demand a more sophisticated way of dimming. The two basic kinds of dimming are the PWM or Pulse-Width-Modulation and the analogue dimming, each of which are switched-mode regulators. Both of these types are similar in the sense that they both control time-averaged current through the diode.

Analogue dimming is definitely a simple method of dimming, it will be the adjustment of cycle-by-cycle from the LED Driver current regulated with a potentiometer. The current is adjusted for the LED increasing and decreasing its intensity.

The downside of analogue dimming is that it only works safe as long as we dim a single light bulb. Systems of LED lights demand a more refined technique. The problem of dimming a method of LED lights is that there are various types of LEDs, requiring various methods for dimming. If you have a system of lights we would like to dim, the many LEDs may react diversely to the same amount of current, and because the current is reduced some LEDs can turn off later or sooner than others. Also, analogue dimming largely changes the colour from the light, similarly to after it is used with incandescent lights.

By far the most frequently used technique of dimming LEDs is Pulse-Width Modulation, which can be simply the cutting in the phase in a certain frequency. PWM switches the devices between fully on and fully off in a frequency that cannot be told through the eye, therefore LED Dirver Ul always run on the forward current recommended. The regularity of switching determines the brightness of light, so the longer the lighting is “on” the brighter the light is going to be. This is actually the same technique utilized in incandescent light dimmers as well, except that incandescent lights respond to current more slowly, and for that reason demand a different frequency.

Two kinds of Pulse-With Modulation signals are employed often with dimming light: the leading-edge as well as the trailing edge techniques. Both of these are different means of cutting the phase, and result in separate dimming technologies. Probably the most frequently used dimmers of LEDs use solely the leading-edge technology. Dimmers marked as R or RL are compatible with most dimmable LEDs, since they work with the leading edge technology and never include electronic transformers. TRIAC drivers, or devices governed from the DMX and digital addressable lighting interface (DALI) protocols and, down the road, may include wireless (RF) as a control option, that is dimmers that turn or slide using a knob, all work with dimmable LEDs.

Alas leading edge technologies controlled using a touch or push button, are often powered by an electric powered transformer, excluding many dimmable LEDs.

The other kind of phase-cutting technique is trailing edge technique, usually utilized in MOSFET or possibly is not suitable for almost all dimmable LEDs. Among the latest inventions appearing on the marketplace is the RAIS lamp technology. RAIS lamps give you a higher degree of functionality and manage to work with all sorts of dimmers available on the market. However RAIS technology remains new, along with its long-term influence on LEDs have not been fully tested. Should they end up being trustworthy their application both domestically and commercially, can dwxakg in the market to be considerably safer and easier than previous dimmable LED lights’.

Inside the ever-evolving technologies of LED lights, dimmable LEDs continue to be to be designed to further compatibility and much better performance. As there is no general rule for the purpose dimmer LED Dimmable Driver might be ideal for, always check the technical details using the distributor. Use of Leds with non-compatible dimmers might ruin the LEDs, plus they are, currently, not the cheapest solution of lighting.

Leave a Reply

Your email address will not be published. Required fields are marked *